Is your DoC written for the 2025/351 rules?
Send one declaration of compliance for a plastic food contact material – yours or your supplier's. Within 2 working days you get a point-by-point check against Annex IV of Regulation (EU) No 10/2011, including the new points 6, 10 and 11, a worst-case migration calculation and a request text for your supplier.
The DoC rules changed. The transition is over.
Regulation (EU) 2025/351 amended Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food. Among other changes, it replaced point 6 of Annex IV and added points 10 and 11 – the content every declaration of compliance must have.
Commission adopts Regulation (EU) 2025/351. Published in the Official Journal on 24 February 2025.
Intermediates first placed on the market after this date that do not meet the new rules must say so in their DoC – and may only be used for articles placed on the market before 16 September 2026.
Plastic materials that only meet the old rules may stay on the market until stocks run out only if they were first placed on the market before this date.
Source: Regulation (EU) 2025/351, Article 4 and Annex I – EUR-Lex
Most DoCs were incorrectly filled-in and incomplete.
European Commission, DG SANTE – Study on compliance documentation on food contact materials in the supply chain (2022), finding from the review of submitted declarations.
Annex IV, point by point
A written declaration is required at every marketing stage except retail (Article 15 of Regulation (EU) No 10/2011). It must contain the information below. The Gap Check marks each point as present, partial or missing.
- 1Identity and address of the business operator issuing the declaration
- 2Identity and address of the manufacturer or importer
- 3Identity of the material, article, intermediate or substance
- 4Date of the declaration
- 5Confirmation of compliance with Regulation 10/2011 and Articles 3, 11(5), 15 and 17 of Regulation (EC) No 1935/2004
- 6Information on restricted substances, including non-intentionally added substances (NIAS); for intermediates, identity and amount of listed substances changed
- 7Information on substances with a restriction in food: specific migration from tests or theoretical calculation
- 8Specifications on use: types of food, time and temperature, highest surface-to-volume ratio verified
- 9Where a functional barrier is used, confirmation of compliance with the barrier rules
- 10For batches intended for reprocessing: confirmation and, where appropriate, composition and reprocessing instructions new
- 11Where substances were manufactured from waste: confirmation of high purity under Article 8(1) new
Source: Regulation (EU) No 10/2011, Annex IV, consolidated text of 14 July 2026 – EUR-Lex
A short report you can forward to your supplier
The table shows each Annex IV point. Where the DoC gives a substance with a specific migration limit and its concentration, we calculate migration in the worst case: everything migrates into the food. If that stays under the limit, compliance can be supported by calculation (Article 16 allows calculations in supporting documents). If not, or if data are missing, the report says which test or data to ask for.
The report ends with a ready-to-send request for the missing information.
DoC Gap Check · LDPE film, 50 µm
| Annex IV | Finding | Status |
|---|---|---|
| 1–4 | Issuer, manufacturer, product, date given | Present |
| 5 | Confirmation cites 10/2011 without the 2025/351 amendment | Partial |
| 6 | No information on NIAS | Missing |
| 8 | Food types given; time, temperature and S/V ratio not given | Partial |
| 11 | No statement on substances from waste | Missing |
Three steps, no call needed
Send one DoC
Fill in the form: upload the DoC or paste its text, and tell us the material, foods and contact conditions.
We check it
Each Annex IV point against the current EUR-Lex text, specific migration limits from Annex I, and a worst-case calculation where the data allow it.
You get the report
By email within 2 working days: the table, the calculation with its inputs and sources, and the request text for your supplier.
DoC Desk
Indicative price, up to 25 materials or products. Nothing to pay now – join the early access list through the form.
Start with the free Gap CheckWhat the paid version would add
- A register of your supplier DoCs, versions and dates
- A check of every new DoC you receive
- Worst-case calculations for your materials
- Drafts of your own DoCs for your customers
- Alerts when the relevant EU rules change
Questions
Is this a legal opinion or a lab test?
No. The Gap Check is an indicative review of the document against the regulation text. It does not replace a laboratory migration test or legal advice. Responsibility for a DoC stays with the company that issues it.
Who has to issue a declaration of compliance?
Under Article 15 of Regulation (EU) No 10/2011 a written declaration must be available at the marketing stages other than retail – for plastic materials and articles, for intermediates and for substances used to make them. The European Commission's guidance on supply-chain information names manufacturers, importers and distributors among those who issue it.
Which materials are covered?
Plastic materials and articles under Regulation (EU) No 10/2011, including plastic multi-layers. Inks, adhesives, coatings, rubber and silicones are outside the free check.
Do I have to upload the document?
No. You can paste the text or describe what the DoC states. The upload is optional and used only to prepare your Gap Check.
Is there any cost or follow-up obligation?
No payment, no obligation. You can tell us in the form whether the paid version interests you.
Your data
FCM DoC Desk is operated by Štefan Toporcer, an individual based in Slovakia (not a registered company). Contact: toporcer.stefan@gmail.com
The form collects your work email, company, website, name, country, role and place in the supply chain, the DoC you send (file or text) and the details of the material and its use. They are used only to prepare and send your Gap Check and, if you ask, to contact you about early access.
Tools used: Tally (form), Gmail (email), Anthropic Claude (preparing the check). Data are kept for 12 months. You can ask for access to your data or for its deletion by email at any time.
Analytics. This site counts visits and clicks with PostHog (EU servers) in cookieless mode: nothing is stored on your device and IP addresses are anonymised. It is used only to see how the page is used, not to identify you.
The Gap Check is indicative and is not a legal or professional opinion, a certification or a laboratory test.